Electronics and Communication Engineering (ECE) comprises Communication Engineering and Core Electronics Engineering. The course idea is to focus largely on the communication part with understanding of electronics.
Electronics and Communication Engineering deals with electronic devices and software applications. It is an interface of chip level hardware and information technology. All of the applications which make life easier and enjoyable such as Television, Radio, Computers and Mobiles etc. are designed and developed by Electronics and Communication Engineers. Electronics and communication engineers can work in aviation and avionics, consumer electronics, electricity plants, manufacturing, distribution, communication & telecommunication, computer application, radio & television, analytical equipment manufacturing and offshore industries.

To nurture engineers of academic excellence in electronics and communication technical education in tune with industry requirements.

To offer excellent qualitative education in Electronics & Communication Engineering, along with professional ethics, through innovative methods of teaching & learning in an experiential teaching-learning environment.

The students study the characteristics of electronic components and measuring instruments. They analyze the characteristics of PN, Zener diode and transistor; design rectifiers with and without filters, study frequency response of amplifiers, measure frequency, and phase of signals. In this lab, students also learn how to use and operate various electronic instruments like multimeter, cro, power supply transistor tester, function generator etc.

Digital electronics is a field of electronics involving the study of digital signals with discrete states and the engineering of devices that use or produce them. Digital electronic circuits are usually made from large assemblies of logic gates, often packaged in integrated circuits. Complex devices may have simple electronic representations of Boolean logic functions.

This lab is in the 5th semester of 3rd year. In this lab, students learn about various electronic measuring instruments such as Voltmeter, Ammeter, CRO, Wienbridge oscillator, Heartley oscillator, Q meter, Digital Multimeter, etc.

This lab comes in the 1st semester of 1st year. Students learn about the verification of ohm’s law, verification of kirchoff’s law, study of PN junction diode, RL circuit, RC circuit, RLC circuit and two wattmeter methods etc. through various electrical instruments and electrical power.

This lab comes in the 3rd semester of 2nd year. Students learn about single phase supply, three phase supply, difference between single phase supply and three phase supply, working of transformers, different types of motors like single phase and three phase motors, induction motor, synchronous motor, etc.

This lab comes in 3rd semester of 2nd year. Students learn about electronic instruments used for making electronic projects and devices. This lab also provides knowledge of different types of wires, pliers, soldering iron, flux and PCB. Soldering of various components on PCB; making dc power supply of 5 volt or above; winding of small transformers; soldering and desoldering of electronic components, etc. is taught in this lab.

This lab comes in 4th semester of 2nd year. Modulation and demodulation of waves, amplitude modulation, frequency modulation, and pulse width modulation using CRO is taught. Students are also given knowledge about modulation index, transmission and reception of signals, different types of antenna, error in signal and noise in signal, etc.

This lab comes in 4th semester of 2nd year. Students learn about verification of different types of network like Norton’s theorem, superposition theorem, Thevnins theorem and maximum power transfer theorem. In this lab, they also learn about different type of filters like pie filter, high pass filter, low pass filter, band pass filter, prototype band pass filter, attenuator, SWR, m- derived low pass filter, etc.

This lab comes in 5th semester of 3rd year. Students are taught about 8085 microprocessor and 8086 microprocessor. They are also taught programming in assembly language.

This lab comes in 4th semester of 2ndyear. Students are taught about power electronic devices, sensors and transducers. They learn to verify V-I characteristics of various power electronics devices like SCR, TRIAC, DIAC, UJT and UJT as a relaxation oscillator, various sensor and transducer, etc.

Mechanical engineering is a discipline of engineering that applies the principles of engineering, physics and materials science for analysis, design, manufacturing, and maintenance of mechanical systems. It is the branch of engineering that involves the production and usage of heat and mechanical power for the design, production, and operation of machines and tools.
This engineering field requires an understanding of core concepts including mechanics, kinematics, thermodynamics, materials science, structural analysis, and electricity. Mechanical engineers use these core principles along with tools like computer-aided engineering, and product lifecycle management to design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling systems, transport systems, aircraft, watercraft, robotics, medical devices and others.

To groom motivated, environmental friendly, creative Mechanical Engineers, striving continuously in pursuit of excellence, entrepreneurship and innovation.

1.To impart total quality education through effective hi-tech teaching-learning techniques and department-industries collaboration. 2.To mould young dynamic minds full of potential into full-fledged future professionals. 3.To fulfill the Government’s “Make in India” industrial policy through innovation and research.

The objective of the workshop is to get hands on knowledge of several Workshop Practices like carpentry, fitting, welding, machinery, foundry, blacksmith, painting and polishing, sheet metal shop, etc and to learn safety regulations to be maintained in a shop floor. This laboratory is scheduled in the 1st and 2nd semester for all engineering students. Apart from the curriculum, some additional experimental setups are there which help the students enhance their knowledge. Students also get opportunity to implement their ideas through various application oriented micro projects.

The applied mechanics laboratory is used for both undergraduate and postgraduate teaching. Students have the opportunity to use experimental apparatus and compare results against that of accepted theory, developing and enhancing their knowledge of important scientific concepts.

Engineering Drawing and Design Labs aims to provide engineers with appropriate knowledge of drawing and designs of geometrical patterns, objects and 3-D structures. The students learn to construct various magnificent mega structures and intricate machines. Technical drawing is the language of engineering and is, therefore, indispensable.

The Engineering Materials Lab introduces the concepts, techniques, and devices used to measure engineering properties of a variety of materials. There is an emphasis on measurement of load-deformation characteristics, failure modes and crystal structure. Experiments cover a range of topics: tensile testing, heat treating, impact testing, hardness testing, and corrosion of various materials while including data collection, data analysis, and interpretation and presentation of results.

Thermal Laboratory provides lot of opportunity to the students to study different types of IC engines, boiler performance studies and innovative projects. The performance test, heat balance test, retardation test and emission test can be carried out in a variety of IC engines like petrol/diesel fueled with single/double/multi cylinder engines with modern mechanical/electrical/hydraulic loading devices.

Strength of materials laboratory is well equipped with destructive testing machineries. This lab course is offered in the second year for students from various departments in the school of mechanical engineering. Students understand the theoretical concepts of solid mechanics course and learn to apply it practically in this laboratory. Different types of tests are conducted in this laboratory as per standards (ASTM and IS) to know the various mechanical properties of a material such as young’s modulus, shear modulus, hardness, deflection, etc.

Strength of materials laboratory is well equipped with destructive testing machineries. This lab course is offered in the second year for students from various departments in the school of mechanical engineering. Students understand the theoretical concepts of solid mechanics course and learn to apply it practically in this laboratory. Different types of tests are conducted in this laboratory as per standards (ASTM and IS) to know the various mechanical properties of a material such as young’s modulus, shear modulus, hardness, deflection, etc.

The Hydraulics and Pneumatics laboratory is designed to examine the properties of fluids and to conduct experiments involving both incompressible and compressible flow. Facilities are available for investigating the fundamentals of fluid statics as well as kinematics and kinetics of fluid flow to enhance the hands-on experience of our students.

Refrigeration & Air Conditioning Lab gives on hands on practice with refrigerating circuits and air-conditioning systems. Apart from the curriculum, some additional experimental setups help the students enhance their knowledge. Students also get opportunity to implement their ideas through various application oriented micro projects.

CAD/CAM Lab

This is an important lab for diploma aiming to provide practical training in the field of CAD (Computer Aided Designing) & CAM (Computer Aided Manufacturing).

Metrology & Measurement Laboratory is a well equipped laboratory which provides hands on experience of various measuring instruments utilized in industries for evaluating mechanical properties of a given specimen or structure.

Theory of Machine Lab deals with the study of relative motion between the various parts of a machine, and the forces which act on them. The main objective of Theory of Machines lab is to impart practical knowledge on design and analysis of mechanisms for a specified type of motion in a machine.